ProBass Home

  Sep 25, 2016









Probass Logo

Mike Bucca
Top 10 Lucky Craft Lures #6


The Fluorocarbon Advantage

By: “Triton” Mike Bucca
(www.tritonmike.com)

With top name pros like Gary Klein, Takahiro Omori, Kevin Van Dam, Tommy Martin, Gary Yamamoto, Aaron Martens and many others relying more and more on fluorocarbon line, you really can’t help but to listen to some of the talk about this new age line. Big name tournaments are being won on fluorocarbon lines left and right and the feedback is very positive from the pros that this could very well be the next best thing since nylon monofilament was invented in the early 1900’s. Fluorocarbon lines are without a doubt the next mega trend in bass fishing lines. Read further to find out why.

Before I go further, I want to explain exactly what fluorocarbon line is and a little about the history of this relatively new line. As far as I can research on the internet fluorocarbon was invented in 1970’s in Japan, but it wasn’t until the mid 90’s that fluorocarbon was introduced as a fishing leader line, so yes fluorocarbon line is fairly new to the fishing industry and we have just begun to see its effect. Many of the early generation fluorocarbons were very stiff and hard to manage, but the new processing techniques have enabled the modification of the stiff polymer chains to make this material more flexible and the resultant line more manageable. This results in branching of the polymer backbone and enables the tailoring of properties and improved performance in handling.

Before fluorocarbon was first introduced into bass fishing, fluorocarbon was and still is used primarily by fly fisherman as tippets and also by saltwater enthusiasts as leader line due to its stiffness, strength and abrasion resistance. Most of the fluorocarbon lines are made from a fluoropolymer called polyvinylidene flouride...PVDF for short. PVDF is a high grade engineering polymer with good temperature properties and extremely good chemical resistance. You don't see a lot of it around the house, but it is used for a lot of piping, valves, seals, musical instrument strings, etc. It has several other applications in the electronics industry such as membranes for fuel cells and batteries.

Do remember that Fluorocarbon lines are a type of monofilament lines. Mono is simply standing for mono, or single filament. So typically I will use the phrase nylon monofilament to make the distinction between itself and fluorocarbon lines.

So what are the advantages of this new age line called fluorocarbon over the tried and true nylon monofilaments lines anyway?


ADVANTAGES of Fluorocarbon:

-- One of the primary advantages of fluorocarbon is its near invisibility when it is submerged under water. Fluorocarbon line comes the closest to the light refractive index of water so it is virtually invisible when submerged. This fact alone makes this line very useful in situations that have a clear water environment. A lot of anglers are now using less-visible 16 lb. fluorocarbon for applications where they may have used more-visible 12-14 pound mono previously. Anglers are able to gain extra strength in their fluorocarbon lines due to the less visibility of fluorocarbon in the water.

-- Fluorocarbon's chemical composition and extrusion methods create an extremely strong and durable line. Fluorocarbon does not absorb water like most nylon monofilaments, so it maintains its strength better than nylon monofilaments, which loses strength when exposed to water or humidity. Fluorocarbon is also unaffected by the sun’s ultraviolet rays causing fluorocarbon lines to last significantly longer than nylon monofilaments as well. I have personally noticed that fluorocarbon line can last as long as four times the life of nylon monofilaments, making it an excellent choice for anglers looking for a good value in fishing lines.

--Yet another advantage of this space age line is that fluorocarbon has less stretch than typical nylon or copolymer monofilaments. Your hook sets are always strong and positive and this is a huge plus when fishing deep water finesse baits where line stretch is detrimental to a good hook set. The stretchiness characteristic of fluorocarbon line is more comparable to that of braided lines than nylon monofilaments, but without the thread look of braided lines that are easily seen in clear water. When you are flipping and pitching your subtle bites will go from a barely detectable tap tap while using nylon monofilaments, to bites feeling like a bolt of lighting up the spine of your rod when using fluorocarbon. The bites are three times more noticeable in my hands while using fluorocarbon.

I have to tell a story as it pertains to the sensitivity of fluorocarbon lines. While giving a tank seminar on jerkbaits at the Atlanta Boat Show a few weeks ago, I had one rod spooled with 10lb nylon monofilament and another with 10 lb fluorocarbon. I was using two rods for the sole purpose of saving time tying on another bait during the middle of a seminar. In this particular tank the fish were starving and feeding heavily on almost anything you threw. I was describing the different actions between a pointer 78 and a flashminnow 95MR in the tank and while fishing the pointer 78 on monofilament I can clearly see the fish lightly hitting the bait and quickly spitting it out because the hard jerkbait didn’t feel real to the fish. I could just barely, if at all, feel those fish hit that pointer 78. But when I threw the flashminnow 95MR on the fluorocarbon the fish just picked at the flashminnow just like they did the pointer 78 and the bites were extremely distinguishable compared to those hits on pointer 78 using nylon monofilament. I taught myself a very valuable lesson that day and it made me wonder how many fish have pocket picked my jerkbaits in the past while I was using nylon monofilament and I didn’t even know it. Even though the bites are subtle on inactive fish I could have at the very least has the opportunity to swing on some of those pocket picking fish in hopes to sticking them and getting them into the boat. But now that I use fluorocarbon I will get that opportunity and I will never forget that test and I hope it will give you the reader something to think about as well.

Another advantage of fluorocarbon over a braided line is that fluorocarbon line sinks at much faster rates than nylon line or even much less dense braided lines, which will float. Because of the chemistry of the material and the dense packing of the crystal structures in the polymer chains, fluropolymers are about 1.7 times as dense as nylon, which gives them a much faster sink rate. The fact that fluorocarbon sinks makes it a better choice for baits that dive or sink like crankbaits and deep jig fishing, and it can even help get your deep diving Lucky Craft jerkbaits like the Staysee 90 get a little deeper than a braided line normally would get you.

It is the surface tension of water combined with the lower density that can keep nylon monofilament from sinking under the water’s surface. It often takes the weight of a lure to let the nylon monofilament break the surface tension and sink slowly once it gets wet. Often the dry portion of the nylon monofilament that is unaffected by the weight of the lure, stays on the surface of the water. Most anglers have seen this when fishing with artificial lures. Once the lure hits the bottom, you will notice some of your line still on the surface of the water and any slack in the nylon line will float or arch creating a bow in your line. It is most notable especially when fishing at deeper depths. These bows and arches will not happen with fluorocarbon line. Fluoropolymers, even though they are hydrophobic or water hating, will easily break the surface tension and sink at much faster rates than nylon monofilaments, even without the help of the weight of any artificial lure. This concept leads to a direct connection to your lure, which is a very important aspect when fishing deep water with any lure that is worked below the surface of the water. It is common knowledge that big bows in your line reduce your ability to detect subtle strikes, especially in deep water, and by using fluorocarbon line you have just eliminated those effects.


-The hard finish of fluorocarbon line also provides extreme abrasion resistance over nylon monofilaments. In fact, fluorocarbon has been offered for years as a leader material because of this property, but recent improvements in the processing have enabled makers to manufacture it with enough flexibility to be used solely as fishing line for bass.

Now that’s the long list of advantages here is the short list of disadvantages, but they are very minor compared to the long list of advantages.

DISADVANTAGES of Fluorocarbon:

-One caution with fluorocarbon lines is that you need to be very careful when tying your knots to lures. Knot tying with fluorocarbon is VERY VERY critical to prevent break-offs. A lot of anglers discount the importance of knot tying with fluorocarbon lines and complain of line breakages. I can attest that poor knot tying skills are the most common reasons why anglers break off on fluorocarbon. No matter how long you have being tying knots with fishing line there is always room for improvement.

Here are the steps I take in getting a good strong knot with fluorocarbon. I prefer either the Berkley braid knot or the palomar knot when tying fluorocarbon to lures or hooks. The absolute key to getting a good knot with fluorocarbon is to make sure that your knot is NEAT and not sloppy. Meaning you can't have a strand of fluorocarbon overlapping where it shouldn't be overlapping and you must have a close to perfect knot as possible. Having said that, fluorocarbon lines are fairly stiff and slippery materials, and if you kink or damage the line while making the knot, then the line will be weakened dramatically similar to a single strand wire, once you kink the wire the wire has been weakened. So very careful, slow and systematic knot making, lubrication will help you to form a better knot and offer a stronger bind between your line and your lure. Once you wrap your knot and you are ready to cinch your knot you have GOT to slobber up the knot AND the eyelet of the hook very thoroughly!! Once you wet the knot, SLOWLY SLOWLY SLOWLY, cinch the knot and put a lot of emphasis that your knot stays straight and neat during the cinching process. I take 10 seconds to cinch the knot and I keep checking it to make sure my knot is clean as I am cinching it downward towards the lure. What I do is cinch the knot a 1/4 of an inch and stop and slobber it up and keep repeating the process till your knot is cinched all the way down, but remember to be sure that your knot is PRETTY. If you did everything correctly test your knot by pulling on it. With 8lb fluorocarbon line take the lure in one hand, line in the other with the knot being in between your two hands give it a good pull to see if your knot is sufficient and do this test as often as possible and retie as necessary. I do find myself retying more often on the smaller diameters (8lb test or smaller) than I do on the larger diameter lines. Yes, it's a little bit of a pain to go through some of the rituals that I go through in tying knots with fluorocarbon, but the key to fluorocarbon is some good basic and systematic knot tying skills. By developing good basic knot skills it allows you to concentrate on what is important, finding and catching more fish with the advantages that fluorocarbon provides you. Personally, I just can't imagine fishing with nylon monofilaments again after seeing the advantages of fluorocarbon lines with my own two eyes.

As for knots, I personally like the Berkley braid knot shown below. My primary reason for liking that knot is it is the easiest knot to tie and it is the easiest knot to get a pretty knot every time, compared to the palomar knot, with minimal hassle and alignment. There is very little chance of line overlapping incorrectly with the Berkley braid knot as compared to the palomar knot in my opinion, but both knots are equally as strong if done correctly. The only thing I do differently than the Berkley braid knot picture to the right is I only wrap the loop around the main line only 3 times versus 7 times as shown in the picture.

-- Fluorocarbon is pretty tough for novice anglers to use on spinning reels. It does work very well on bait casting gear with no noticeable problems. If you’re not very comfortable with spinning reels with regular nylon monofilaments, you will probably have a tough time with a spinning reel spooled with fluorocarbon without some kind of a learning curve. In fact, I am finding a lot of anglers using braid with a fluorocarbon leader since braid is a lot more compatible with spinning reels than fluorocarbon, but as you can see from the chart below there is a trade off, line visibility, diving depth of lure and also a giant arch in your line due to the floating characteristics of braided lines. The reason why it’s hard to use fluorocarbon on spinning reels is because the line acts like piano wire and is fairly stiff compared to nylon monofilaments. Also, fluorocarbon is known for its twists and loops especially in the smaller diameter fluorocarbon lines. Basically what happens is when you flip the bail while full of line on your spinning reel the line just springs off the spool with almost no effort. However, it can be tamed. There is no way possible that I have found to spool on new fluorocarbon without the line twisting. So here is what I do to alleviate this problem. I spool my new fluorocarbon onto the reel until it is full. Then when I am on the lake and idling out of the marina I put the tag end of my line through the guides of the rod and into the water (remember fluorocarbon line sinks) and let the water take all of the fluorocarbon off of my spinning reel spool. Once all of the line is off the spool, I then reel the fluorocarbon back onto the spinning reel while holding the line between my thumb and index finger. What you have just done is allow the water to undue the twists in your line for you. Now your fluorocarbon will be a lot more manageable on a spinning outfit. You will still have the stiffness in your line, but I have always found that fluorocarbon is like a fine wine, in that it becomes more limp and softens with age.

-- The final disadvantage of MOST fluorocarbons is that it costs a bit more than nylon monofilaments. But coupled with the fact that fluorocarbon lasts four times longer than nylon monofilaments you still come out way ahead in the value department as nylon monofilaments normally last for only a month or sometimes less under heavy use. The reason for the extra cost is that raw PVDF (fluorocarbon) resin costs about four to five times as much as nylon and since the material is twice as dense as nylon, you get about half the yield from the same amount.

Since fluorocarbon line is a sinking line that can be claimed as a disadvantage when using it for hard topwater baits such as a walking the dog with a Lucky Craft Sammy or Gunfish. The line sinks so readily that it drastically hampers the action of almost all hard topwater baits. Because of this simple fact, I find nylon monofilament to be a better option for topwater fishing. However there is no problem in using fluorocarbon for most types of buzzbaits, because there is no action to impart in most buzzer style lures.

Find below a ratings chart in the top 7 criteria that anglers use when deciding on purchasing their fishing lines. I found it interesting to see how fluorocarbon stacks up against the rest. Do keep in mind that a lot of other environmental variables come into play when choosing your fishing lines other than the 7 criteria I have listed below so make your choices based on your needs. They include the categories that we have already discussed.

Ratings Chart
Are you using the right line???
4 = being best; 1 = being worst

Categories
Cost
Abrasion Resistance
Line Stretch
Life span
Line Visibility
Wet line Strength
Bait Depth
Friction
TOTAL SCORE
Nylon Monofilament
4
2
1
1
2
2
3
2
17
Braid
2
3
4
4
1
4
1
3
22
Fluorocarbon
1
4
3
4
4
3
4
4
27
Copolymer
3
2
2
2
2
2
3
2
18

 

Joining two lines:
Since the cost of fluorocarbon is at a premium price, I use nylon monofilament as backing on all of my bait casting and spinning reel outfits to maximize the use of the fluorocarbon with minimal waste. If I already have a reel spooled with nylon mono, I will go into my yard on or on the water and make a long cast with a heavy topwater bait. Once my cast is complete I have then determined my maximum casting distance. I then strip off another 30 to 40 feet of nylon mono and cut my line and then join the nylon monofilament with the fluorocarbon line and reel the fluorocarbon onto the spool of the reel. The extra 30 to 40 feet gives you a buffer for numerous reties and professional overruns if you have them. There are a myriad of knots that you can use for this purpose. I personally like to use either a J-knot or a double uni-knot to join the fluorocarbon to other lines. These knots will also work well with joining fluorocarbon to braid or to copolymer lines as well. Just be sure to follow the instructions I set forth above, i.e. slobber up heavily, make pretty knots and a slow, slow cinch.

Fluorocarbon Uses:
Having mentioned all the advantages and disadvantages of fluorocarbon, what techniques are best for the use of fluorocarbon line in bass fishing? Before I mention the specifics of technique fishing with fluorocarbon, let me mention one often overlooked advantage of these lines, and that is the excellent frictional properties. Fluoropolymers, by nature of their chemistry are very slippery materials. Think about Teflon as the best known example of a non-stick, slippery fluoropolymer. Beside the fact that Fluorocarbons won’t stick and bind in knot tying quite like nylon monos, the other significant edge of these very slick lines is the reduced friction and wear on guide surfaces. Low friction also offers advantages in both casting and retrieving and can translate into longer casts and smoother retrieves, especially under fighting loads. One slight disadvantage to the stiffer flurocarbon lines would be in casting very light baits where a somewhat more flexible line type would offer an improvement. Softer, more flexible materials can minimize the feedback and interference of the line when casting light lures which have little momentum.

Aside from the material properties such as low friction, Fluorocarbon lines offer many advantages for specific techniques. Most dropshot pro’s almost use fluorocarbon line exclusively for the simple fact that dropshotting is technically a clear deep water finesse technique. Sensitivity is paramount for deep finesse fishing in depths of over 40 feet and the limited stretch characteristics of fluorocarbon ties in very well with any deep water finesse tactics.

Flipping and Pitching is another technique that I like to use with fluorocarbon lines. Fluorocarbon is very abrasive resistance due to its hardness, and for those of you that have to line watch with nylon monofilament, those days are over with the sensitivity (minimal stretch) features of fluorocarbon. Those subtle bites now become stronger and you are able to react quicker to those bites before the fish blows your jig or creature bait out. Because fluorocarbon comes the closest to the light refractive index of water it is virtually invisible to the fish when submerged and it is great for clear water flipping and pitching where as braid is more visible in clear water. If you still find the need to watch your line you can use a permanent sharpie marker to color parts of your line that is above the water while you are fishing your jig. Remember since fluorocarbon has the same light refractive index as water it is fairly invisible under water so you can upsize your line with less-visible 16 lb. fluorocarbon for applications where they may have used more-visible 12-14 pound mono previously.

Fluorocarbon is also an excellent choice for fishing jerkbaits and crankbaits as well. Again, fluorocarbon has great abrasion resistance for cranking through heavy laydowns and due to the fact that fluorocarbon is a sinking line with minimal stretch you will have no problems detecting bites or pocket picks when fishing jerkbaits and cranks. You might even get a little more depth out of them than if you used a nylon monofilament or braided lines.

Spinnerbaits, Swim baits and Traps are other great baits to use with fluorocarbon. The biggest advantage to using fluorocarbon with spinnerbaits, swim baits and traps is to be able to set the hook at the end of long casts. When making a long cast in open water flats with spinnerbaits and traps, the line stretch of nylon monofilament is enough to cause you a weak hook set on those long distance casts especially if your rod is in the wrong position. But with the limited visibility and stretch of fluorocarbon lines you will be sure that the fish doesn’t see your line as well as get a decent hook set even if you have bad fishing form.

I have always used my lines to feel and hold the fish after the hookset. Having said that take advantage of the action of your rod to land the fish and use a light drag if possible. If you are unfamiliar with the free-spooling technique of fighting a fish I would strongly advise you to read up on this lethal fish fighting technique to even further your development into a proficient fish fighting angler and watch your landing percentages sky rocket tremendously.

That pretty much sums everything up on this new age line that is becoming more and more popular in the sport of bass fishing. There are lots of characteristics to take advantage of in fluorocarbon lines with minimal disadvantages. Since I have switched over to fluorocarbon on all of my bait casters and spinning reels I can honestly say that is the best thing I have ever done to improve my fishing. Give it a try and take the tips and information I have given you here and see for yourself why this is the best thing to happen to bass fishing since the invention of nylon monofilament in the early 1900’s and it’s only the beginning of great things to come from this new age line.

Special thanks to Mark Gibson (Mark G of the BFHP), a Materials Scientist from Stillwater, MN, for input into the technical portions of this article.

For a good selection of fluorocarbon line visit

www.tacklewarehouse.com

 

 

About Us  Disclaimer  Contact Us  Privacy Policy  Acceptable Use Policy
Copyright©1996-2016, ProBass Networks Inc,   All Rights Reserved